Douglas Johnson Weigh the wire Measure it twice cut once. Now you can buy a
cheap 6 inch digital caliper MM or inch. May help a little.
On Sun, Mar 7, 2021 at 11:03 AM Douglas Johnson <doug379306@xxxxxxxxx>
wrote:
> Thanks, TeslaMap did it to me😉
> DRJ
>
> On Sun, Mar 7, 2021 at 1:15 PM nickobert testein <
> nickobert.testein@xxxxxxxxx> wrote:
>
> > My magicball says you would need 2329' of AWG 28.
> > (AWG 28 @ .0126" yes?)
> > I feel for you man.
> >
> >
> > On Sat, Mar 6, 2021 at 2:59 PM Douglas Johnson <doug379306@xxxxxxxxx>
> > wrote:
> >
> > > Please correct me if it is my Math that failed me! I Wind these coils
> by
> > > hand, it is VERY tedious. This spool I purchased, [AWG 28 - 1Lb -
> 2027']
> > > was for a coil, 3.503" Diameter by 32" long which should come to
> 1,985',
> > of
> > > a 2027' spool, I was out of wire at 28.5 inches, that equals 1768' of
> > wire,
> > > a deficit of 259 feet! Perhaps in the future I should not cut it so
> > close.
> > > DRJ
> > > _______________________________________________
> > > Tesla mailing list
> > > Tesla@xxxxxxxxxxxxxxxxxx
> > > https://www.pupman.com/mailman/listinfo/tesla
> > >
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxxxxxxxxxx
> > https://www.pupman.com/mailman/listinfo/tesla
> >
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla