[Home][2021 Index] Re: [TCML] X-ray transformer wiring help! [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] X-ray transformer wiring help!



To The group, I am, by far, not very learned in this field, BUT!
I think it the duty of the "more" learned in this group to help this guy by
not holding back and explain what he needs to do so he doesn't damage any
more transformers with this rotary gap!
Please do not ignore this post, HELP THE MAN! Isn't what this group is all
about.
AJ

On Sat, Feb 20, 2021 at 8:00 PM Curt Wilson <3wisenconst@xxxxxxxxx> wrote:

> My names Curt and I've been trying to get a tesla coil up and running for a
> while now. I've used multiple power supplys such as four mots wired in
> series parralell with a center tap ground but they did not last probably
> due to being used for fractal wood burning prior. I have tried NST's but
> they had the gcfi on them and only worked for the first few minutes. So now
> I've moved onto a cathode/anode 80 kva x-ray transformer that feeds through
> a bucket capacitor and into a bench grinder with a 6inch plastic fan wheel
> that I wove solid copper wire through four of the fins and have a oil
> burner point on with side for the pick ups. My primary coil is 9/16" x 1/8"
> solid copper ribbon with 1"spacing between coils and my current secondary
> is 4.5" pvc with two recycled 34 guage magnet wire soldered together and my
> top load is two old chevy hubcaps hot glued together. I'm running a 30amp
> variac 125v ac to regulated 125v ac and I can't get past about 30v with out
> the fuse blowing. Just when the rotary gap starts to fire the fuse blows.
> I've tried a mot with secondary shorted between the transformer and the
> variac but it didn't seem to make a difference and I've tried a250 watt
> 15ohm resistor first where the mot was then tried it between the
> transformer and the primary. Both places it just heated up and would not
> allow any spark at the gap. Any help with the wiring on the transformer or
> variac or suggestions would be greatly appreciated! Thanks in advance.
> https://photos.app.goo.gl/nPS9fMg36375yAXi8
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla