I personally found Gao's step-by-step process details building his coils
very helpful, over at https://www.loneoceans.com/labs/teslacoil1/
Joshua Thomas
On Wed, Dec 8, 2021 at 4:50 PM Gary Lau <glau1024@xxxxxxxxx> wrote:
> I have a good starting point published on my website, describing the design
> sequence:
> http://www.laushaus.com/tesla/howtodesign.htm
> Feel free to post questions to this List.
>
> Gary Lau
> MA, USA
>
>
> On Wed, Dec 8, 2021 at 4:43 PM Lux, Jim <jim@xxxxxxxxxxxxx> wrote:
>
> > On 12/8/21 9:05 AM, Zeeshan Mughal wrote:
> > > I need instructions on how to properly build tesla coil using neon sign
> > > transformer and mot. I have already made tesla coils but i want to go
> to
> > > advance level with more accuracy.
> > > _______________________________________________
> > > Tesla mailing list -- tcml@xxxxxxxxxxxxxxx
> > > To unsubscribe send an email to tcml-leave@xxxxxxxxxxxxxxx
> > >
> > well, this list is a wealth of information. Particularly the archives
> > at pupman.com
> >
> > There are some websites that have some helpful info. When it comes to
> > sizing capacitors, windings, toploads there's a variety of tools to help
> > - JavaTC at http://www.classictesla.com/java/javatc/javatc.html is
> > exceedingly complete.
> >
> > If you need info about construction details (how to make a MMC, or how
> > to remelt the tar in a NST, for instance), then posting a question will
> > get you answers.
> >
> > _______________________________________________
> > Tesla mailing list -- tcml@xxxxxxxxxxxxxxx
> > To unsubscribe send an email to tcml-leave@xxxxxxxxxxxxxxx
> >
> _______________________________________________
> Tesla mailing list -- tcml@xxxxxxxxxxxxxxx
> To unsubscribe send an email to tcml-leave@xxxxxxxxxxxxxxx
>
--
Joshua Thomas
My new email address is: joshuafthomas@xxxxxxxxx
Please update your information if you have not already done so.