This is a excerpt of a thread by Ed Sonderman
I had a tuning problem, even when the primary tap was set right where it
should be - according to my calculations. John Morawa pointed out to me
that
I needed to re-set the phase angle on the motor after increasing the
capacitance - which hadn't occured to me.
Ed Sonderman
In the above statement, Mr Morawa stated about needing to re-set the phase
after increasing the tank capacitance
This is a synchronous spark gap they are talking about.
Let just assume that the srsg is set to fire just before peak, how is
changing the tank cap going to change the phase, as it is still firing at
the same phase no matter what size tank cap is used.
Any thoughts, I do enjoy Ed's adventures and documentation,
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla