I also think it's some very specialized type of connector. The design
takes great effort to ensure that the many contacts are spring loaded to
uniformly grip a male connector. Is it silver-plated, which would suggest
an RF application? Is the material brass? I just can't fathom where all
that current is being channeled to - the short point seems like a dead end.
Gary Lau
MA, USA
On Tue, Jun 30, 2020 at 6:36 PM Tedd Dillard <tedd.dillard@xxxxxxxxx> wrote:
> It appears to be some type of electrical connector.
> The slotted end with the springs is the female side. It is intended to snap
> over a male part and lock together. The many small fingers provide good
> contact area but it can be disconnected. Large cicuit breakers use
> connections like this and are called stabs. The other end looks like it is
> to connect to another part maybe even the end of a cable.
>
> On Jun 30, 2020 1:54 PM, <rburk@xxxxxxxxxx> wrote:
>
> > All,
> >
> > I'm hoping the collective knowledge of the group can identify the
> > following object:
> >
> >
> https://www.dropbox.com/sh/to4u2h1pjw3gmoi/AABS0c73co6dLV3P1xdzeFoEa?dl=0
> > [1] />
> >
> > The object is 2" long. Thanks.
> >
> > Randy
>
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla