[Home][2020 Index] Re: [TCML] Before and After [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Before and After



Hi Shaun and all,

I am of the opinion that your current level of input power will probably
not see much of a difference in doing a much larger "ground plane".
From the few tests you did, you seem to be plenty sufficient with the
single rod as is. At your current power level, anything more done
grounding, you will now see what I like to call "greatly diminishing
returns for your efforts and materials". At much higher input levels, more
grounding will be required of course...but again you will eventually hit a
"wall" and again diminishing returns. Of course you do not want to be
"under grounded" at any power level. Need to reach a "balance". Some may
also have "how the soil is in their neck of the woods" as a factor
affecting overall grounding efficiency.

At least this is the way I understand it. Some others more knowledgeable
than me will have some input hopefully also coming.

I also too, want to mention a secondary grounding mishap I had
myself...oh... about a year ago. I had a poor (unknown at the time)
connection to a ground rod outside on my 304 VTTC. This was at the time,
the first time I tried to run this outdoors. Before this, it was run only
indoors in a basement on a dedicated ground rod in the basement floor.
Well...it very quickly destroyed/messed up my interrupter circuit for
pulsing. At least at the time it was built on a breadboard, so a bit easier
to fix. I actually lost track of all circuitry messed up when my coil was
"searching for a RF ground" through an undesirable path in the interrupter
circuit. I basically had to start all over on the circuit from scratch with
all new...did not trust even the few things that seemed OK. Frustrating
experience...caused me also to miss what was going to be my first
attendance at a Teslathon...oh well...I always make sure now of a
sufficient for the application ground and a GOOD connection.

Just my two cents.

Chris Reeland
Ladd Illinois USA

Sent from my Samsung Galaxy Tab® S
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla