I found the problem. I noticed the options for toploads was not showing all the rows, so I scrolled up to find the #1 line had the values it kept going back to. I deleted those values and inserted my own, and everything worked properly.
Sorry to bother you guys on this,
Terry
On Monday, April 27, 2020, 06:32:48 PM CDT, Bart Anderson <gort@xxxxxxxxxxxxxxxx> wrote:
Thanks Matt. Also Terry, is it the old Javatc program your having issues
with or Javatc3D? Both programs are listed there so just want to make
sure we all talk apples and apples.
Take care,
Bart
On 4/27/2020 2:47 PM, derstrom8--- via Tesla wrote:
> Hi Terry,
> We'll need a little more information than that. Could you please export your load file and paste the text in email? That way we can load your solution into JAVATC ourselves and see what is wrong.
> Example load file text:
> units=0,
> ambient=0,
> s_ws=0,
> s_Al=0,
> p_ws=1,
> p_Al=0,
> p_ribbon=0,
> temp=68,
> g_radius=100,
> w_radius=100,
> ceil_height=150,
> s_radius1=2.26925,
> s_radius2=2.26925,
> s_height1=23,
> s_height2=44.8085,
> s_turn=895,
> s_wd=24,
> p_radius1=3.75,
> p_radius2=7.969,
> p_height1=23,
> p_height2=23,
> p_turn=8.438,
> p_wd=0.25,
> p_vwidth=1,
> p_rthick=0.1,
> Cp_uF=0.0188,
> Lead_Length=30,
> Lead_Diameter=0.2,
> desired_k=0,
> t.inner=6.25,
> t.outer=21,
> t.height=48.8085,
> TT=true,
> TG=false,
> d.inner=0,
> d.outer=8.25,
> d.height=48.8085,
> DT=true,
> DG=false,
> x_Vin=120,
> x_Vout=12000,
> x_Iout=60,
> x_Hz=60,
> x_Vadjust=140,
> x_ballast=0,
> rsg_ELS=1,
> rsg_ELR=4,
> rsg_rpm=1800,
> rsg_disc_D=10.6,
> rsg_ELR_D=0.375,
> rsg_ELS_D=0.375,
> stat_EL=6,
> stat_EL_D=1.25,
> stat_gap=0.25,
> SPE=true,
> RGE=false
>
> Thank you,
> Matt Lewis, Fairlee VT
>
> -----Original Message-----
> From: Terry Oxandale <Toxandale@xxxxxxx>
> To: tesla@xxxxxxxxxx <tesla@xxxxxxxxxx>; Futuret <futuret@xxxxxxx>
> Sent: Mon, Apr 27, 2020 4:37 pm
> Subject: [TCML] JAVATC Topload confusion/question.
>
>
> Was looking at some specs on JAVATC, and was unable to determine why the "solution" always put the topload somewhere around the middle of the secondary coil. Tried various things to fix it, but would always return to a mid-secondary location in the graphic provided when I "RUN JAVATC". This did not happen the last time I used similar inputs. Any suggestions from those that use this tool frequently?
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
> This email and any attachments are for the sole use of the intended recipient(s) and may contain confidential information. If you receive this email in error, please notify the sender, delete the original and all copies of the email and destroy any other hard copies of it.
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxxxxxxxxxx
> https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla