[Home][2019 Index] Re: [TCML] Coupling and Primary [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Coupling and Primary



Doug, could you tell a little more about your power source and spark gap, please.

Dave
Nokesville va.

On 2/18/2019 3:45 PM, Douglas Johnson wrote:
Gary, That is my plan but first I want to be getting the most I can out of
the coil.
Doug

On Mon, Feb 18, 2019 at 3:34 PM Gary Lau <glau1024@xxxxxxxxx> wrote:

Assuming that you still have those sliding secondary coils to facilitate
coupling adjustment, can you slide them while the coil is running and see
if spark length strictly diminishes with lower coupling, or if there are
any peaks or nulls along the way?

Gary Lau
MA, USA

On Mon, Feb 18, 2019 at 1:50 PM Douglas Johnson <doug379306@xxxxxxxxx>
wrote:

Here is another video of the adjustable coupling. original primary was 10
turns .060 wire, this primary is 4 turns of 1/4" copper. Both primary's
are
5" total diameter. Performance is much better!
Doug
https://youtu.be/mXPoXpcY0so
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla