[Home][2019 Index] Re: [TCML] Need capacitors [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Need capacitors



These are high-current (152 Amps RMS at 580 Volts RMS) self-healing polypropylene metalized-film-foil snubber capacitors. Ideal for primary circuits in solid state Tesla coils when stacked in series. A good discussion about this particular cap can be found here on the 4hv list:

https://4hv.org/e107_plugins/forum/forum_viewtopic.php?123061.post

Bert

Allen Bishop via Tesla wrote:
Whatever for? Those are starting motor caps and surely would never work as a capacitor string for the primary of a Tesla coil.
Allen BishopColorado Springs


-----Original Message-----
From: Brian Decosta <briandecosta38305@xxxxxxxxx>
To: Tesla Mailing List <Tesla@xxxxxxxxxx>
Sent: Tue, Aug 27, 2019 5:20 am
Subject: [TCML] Need capacitors


Does anyone on the list have any SP2550-2 Eurofarad 3.75 uF 580V RMS caps that they are not using?  If so I need about 10 of them.

Thanks

Brian

Sent from my iPhone
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla