[Home][2018 Index] Re: [TCML] Motor Needed for RSG [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Motor Needed for RSG



Hello Tim,

You may have to consider a small universal motor with an attached gear or pulley reduction so that the motor can run fast enough to cool itself.

Steve White
Cedar Rapids, Iowa

----- Original Message -----
From: "Tim Flood" <tflood@xxxxxxxxxxx>
To: tesla@xxxxxxxxxx
Sent: Monday, November 26, 2018 10:51:24 AM
Subject: [TCML] Motor Needed for RSG

I need a small variable speed motor that can be controlled to around 1000
RPM. I have searched and searched on line with no results. And, small needs
to be around 2" or 3" in diameter if possible.

What I have found so far are universal motors rated at 1/15 HP and 5000 to
10K RPM. These motors will not function when run at 1000 RPM.

Any ideas, sources or even someone may have one for sale?

Thank you and any ideas will be appreciated.

Tim
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla