[Home][2018 Index] Re: [TCML] SGTC conversion question. [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] SGTC conversion question.



James,

A coil that is suitable for single ended drive "could" be used in a bipolar arrangement.  The old Cenco bipolar coils were built this way.

However, I think that you would be better off with a secondary with a gap in the center where the windings are in the "shadow" of the primary.

Secondary windings that fall within the windings of a typical cylindrical primary would not add any useful voltage to the output of the coil.

If you used a flat pancake primary, this effect would be minimized, but I can't ever recall seeing a bipolar coil with this sort of primary arrangement.

Dave


On 6/11/2018 1:50 PM, James Janota wrote:
I had an idea. After I get successful at my coil building, how hard would it be to change it to a bipolar TC?

Regards

James Janota

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla