[Home][2018 Index] Re: [TCML] Divide and conquer [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Divide and conquer



On 2/26/18 8:42 PM, Bert Hickman wrote:
Chris,

It's a very challenging design problem. And, the divider will be quite sensitive to changes in the surrounding E-field. Since TC sparks create shifting space charge regions with corresponding fluctuating E-fields in the surrounding air, accurate direct measurements can be done only if the Tesla coil is not actively creating streamers/leaders.




you might look at commercial products made from this:
Not a lot of design info, but

http://www.rossengineeringcorp.com/products/measurement/hv-voltage-dividers.html

is an example.

I'm sure there's stuff out there about designing a divider to work with the output of a Marx at megavolt levels - way above what a TC will put out.

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla