[Home][2018 Index] Re: [TCML] VTTC feedback coil phasing [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] VTTC feedback coil phasing



Hi Steve,

Been a little bit for me to post, I've been busy with other things, but I
have been reading posts when I can.

Don't give up yet...takes some time. They are tricky to tune up, but not
impossible.
Your tube and coil should be more than capable of more.

Because of some of your other recent posts, I had a bit of time to try some
of the things mentioned on my pulsed T-200 tube little coil last weekend.
Just a note, a T-200 is fairly similar to a 810 tube. Was not planning on
increased input power past 120v. Had it tuned up to 20" from 18" several
weeks ago with some more tweaking. Was happy with this. But I decided what
the heck, let's pump up the power. Several changes later and experimenting,
now up to 24". But I have run into some new problems along the way, even
though it works. My gut feeling is I can get even more but now I have to
make bigger changes.

Going to start another message. Need think about all I did last weekend and
compose thoughts and post them.

Give me a bit and I should get it posted later tonight.

Chris

Sent from my LG V20
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla