[Home][2018 Index] Re: [TCML] Fwd: Bleeder resistor for Maxwell cap [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Fwd: Bleeder resistor for Maxwell cap





On 13/02/2018 23:42, jhowson4 wrote:
So you discharge through a resistor. You ground one end of the resistor, such that if something strange is happening, it's just another layer of saftey.  You do need a decent power rating. But 100ohm 100W resistors are plentiful.
Once everything is grounded happily, a storage short is placed on the cap to keep it from charging back up again, as can happen with the right conditions.

I believe that high voltage cables are still  be dangerous even when switched off.  The insulation which has been strained in use
returns to normal and in doing so can generate dangerous voltage.

Maybe the same can happen to caps, as you say in the right conditions.


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxxxxxxxxxx
https://www.pupman.com/mailman/listinfo/tesla