[Home][2017 Index] Re: [TCML] Tesla Coil Mailing List [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Tesla Coil Mailing List



On 5/29/17 6:52 AM, Dave Delman wrote:
What would be the best way to ask for advice regarding problems with my
first Tesla Coil build?

When I first tested it I was getting some arcing from the lower aspect
of the secondary to the primary. I fixed the burnt insulation on the
secondary, coated the secondary with Polyurethane and added Plexiglas
sheeting on top of the primary. Now I am getting arcing on the top few
inches of the secondary to itself.


You might be over coupled.. raise the whole secondary a few inches.


What are you using as a ground plane under the coil?


_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla