Hi David, that’s a great deal and if I were still doing HV / mad science / pulsed power work, I’d be
snapping up some of it.
> On Mar 3, 2017, at 8:57 AM, David Rieben <drieben@xxxxxxx> wrote:
>
> Hi all,
>
> In need of some extra space (and maybe a bit of extra disposable income) I have decided to make available some of my cache of high voltage x-ray cable that I would likely never get around to using to the esteemed residents of this forum. I have several lengths of this cable that range roughly in length from 25 to 65 feet. With the exception of a single end of one of these pieces, they do NOT have the Federal shockproof male plugs on the ends (for plugging into the female receptacles of the transformer and/or the X-ray tube head), but are all the thicker 150 kV rated stuff, around 3/4" to 7/8" outer diameter.
>
> This cable has three inner conductors that are lightly insulated from each other for the filament voltage. This threesome bundle is all insulated with thick rubber sheathing for the high voltage standoff, which is in turn wrapped in semiconductor carbon tape and a fine metal mesh (which is normally grounded for electric field shielding), then finally with a fairly thin rubber outer sheathing. I typically just solder the three inner conductors together as a single conductor unit at the terminations and peel back enough of the outer semiconductor and metal mesh to prevent inner conductor to outer shielding flashover.
>
> Anyway, I am thinking maybe 50 cents/foot or make me a reasonable offer for however much length you would like and contact me off list for pics and/or further details.
>
> David Rieben
>
> Sent from my iPhone
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla