[Home][2017 Index] Re: [TCML] Pole pigs and PFC caps ? [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Pole pigs and PFC caps ?



My guess would be either between the controller and the ballast, or between
the ballast and the pig.


-----Original Message-----
From: Tesla [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of Jeremy Scott via
Tesla
Sent: Saturday, June 10, 2017 14:07
To: Tesla Coil Mailing List
Subject: Re: [TCML] Pole pigs and PFC caps ?

unsubscribe 

    On Saturday, June 10, 2017 8:38 AM, Mike Tucknott
<michaeltucknott@xxxxxxxxxxxxxx> wrote:
 

  Hi all it been a long time since I've posted but need a wee bit of advice.
if I put a PFC cap across the supply line to my coil where about's in the
feed does it go I use an inductive ballast for my pole pig. 
So from my wall out let my set up is :- Mains - control box - ballast - pole
pig.

Cheers mike Tucknott

Sent from my iPad
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla


   
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

---
This email has been checked for viruses by AVG.
http://www.avg.com

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla