The inductance of a resistor that size absolutely will not matter at TC frequencies.
In fact, you’d be hard-pressed to measure it even with good gear until you got into the
upper MHz. :D
- Bill “Gomez” Lemieux
PS: yeah, I’m back, sorta.
PPS: still working on that last coil, mostly due to lack of money and time
> On Sep 8, 2016, at 8:53 PM, Gary Lau <glau1024@xxxxxxxxx> wrote:
>
> I don't think the non-inductive quality is important, but 16 Ohms is way
> too low to be useful.
>
> Regards, Gary Lau
> MA, USA
>
> On Thu, Sep 8, 2016 at 7:08 PM, Adam Merchant <megavolttx@xxxxxxxxx> wrote:
>
>>
>> Greetings-
>>
>> I'm in the middle of adapting my terry filter to work with my new
>> power supply; a France and a transco 15kV 30 mA in parallel. I haven't been
>> able to find ideal resistors online.... 1000 ohm 100 watt. I know this
>> isn't a super critical specification, but was wondering if anyone could
>> offer some guidance. Maybe a web site or a combo of certain resistors that
>> would do the job as well.
>> I did find on eBay some non inductive wire wound 100 watt resistors
>> for a decent price, however the highest resistance available I've seen is
>> just 16 ohms. Any thoughts on this?
>> Previously I've used the kind with the aluminum heat sink and I
>> believe I've read others that agree that this wasn't the best option... -
>> one of mine shorted internally and now it's like mohms and mohms of
>> resistance.... Thanks a bunch
>>
>> Adam
>>
>> Sent from my iPhone
>> _______________________________________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxx
>> http://www.pupman.com/mailman/listinfo/tesla
>>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla