Using a magnifier setup makes this quite easy. I did this for the Royal Institute Christmas lectures, and flew a tertiary and topload about 15m from power unit, connected with just a length of enamel wire. https://www.youtube.com/watch?v=5piP_qfDvBA
It could have gone at much higher power levels, but from some poorly placed broadcast quality cameras!
Colinl
-----Original Message-----
From: Tesla [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of John Cooper
Sent: 19 July 2016 03:06
To: arcin_n_sparkin@xxxxxxxxx; Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: Re: [TCML] Remote coil
I want to run the coil upside down from the ceiling bout 15ft high but have power source on floor.
-----Original Message-----
From: undisclosed recipient via Tesla
Sent: Monday, July 18, 2016 7:59 AM
To: Tesla Coil Mailing List
Subject: Re: [TCML] Remote coil
Currently my MMC is six feet away from nst's and the primary using neon sign cable.
I have not noticed any degradation in performance.
The static spark gap is six inches and I would suspect that the same could be done with that.
I don't use a terry filter.
The main problem would be I/R losses and induced voltages by running them parallel for extended lengths, like you would for spark plug wires.
Sent from my iPad
> On Jul 17, 2016, at 11:18 PM, wt5y <wt5y@xxxxxxxxx> wrote:
>
>
>
> How far can you seperate the NST BANK, MMC, spark gap, Terry Filter
> away from the primary and secondary coil?
> John cooper
> Sent from my Samsung GALAXY S5™, a Cricket 4G LTE smartphone
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla