[Home][2016 Index] Re: [TCML] Ring topload [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Ring topload

This is not a series of hoops, it is one long piece, coiled.
Doug
-----Original Message----- From: jimlux 
Sent: Saturday, February 06, 2016 8:45 PM
To: tesla@xxxxxxxxxx
Subject: Re: [TCML] Ring topload

On 2/6/16 4:39 PM, doug wrote:

Question about ring top load, With a top load formed with copper tube as
shown here, should the free ends of the tubing be connected?





http://www.ebay.com/itm/3-5-x-14-Copper-Tubing-Toroid-for-Tesla-Coils-High-Voltage-Projects-Aluminum-/321896530793?hash=item4af2874369:g:PoEAAOSwo0JWIynd



Do you mean the hoops that make up the toroid? yes: A free end of tubing
will have sharp edges.

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla 
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla