It would be a useful question to ask - which better approximates (for the
purpose is sizing a PFC cap) the load of an NST charging a cap - an open
circuit or an arc (pretty much a short circuit)? Not sure but my guess is
neither.
Regards, Gary Lau
MA, USA
On Mon, Dec 5, 2016 at 10:30 AM, wt5y <wt5y@xxxxxxxxx> wrote:
>
> Been a while, I was wrong I use 5 caps. without a tesla coil hooked up my
> 3 nst's drew 25 amps just pulling an arc. in the us 20 amp receptacles are
> all we have for 120. but with 5 ac caps no more blown fuses or breakers.
> below is link to my youtube vid showing nst's current gauge and using
> screwdriver to short em out.
>
>
>
> https://youtu.be/0BF-g4dZ7j4
>
>
>
> Sent from my Samsung GALAXY S5™, a Cricket 4G LTE smartphone
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla