I don't suppose you're located anywhere near Grand Rapids, MI are you? We
have a magnificent SawStop table saw, a giant Panel Saw, and both are
locked-in accurate. I'm sure the team would be happy to tackle the puzzle
of your misaligned table saw if you bring it by.
On Thu, Sep 3, 2015 at 1:32 AM, Matthew Sweeney <msweeney23@xxxxxxxxx>
wrote:
> I'm building upto 14" diameter VDG for free (for any educational
> institution or retail not for sale demo only, or otherwise convincable
> persons of insanity) + mayetials/shipping but have hit a snag:
>
> I aquired a new job site table saw Bosch 4100 something with mount its
> great for price but I'm having problems with miter alighment. Out of box
> the blade was of 1/8 inch front to back which is simply unacceptable. I've
> followed the Instructions to align this but when I retighten the bolts it
> reverts to its old cappy 1/8 inch Out of alignment.
>
> So my question is, should I give up return the product and double up for a
> proper cabinet saw, or persist and widen those factory slots to get a
> perfect measure
>
> We are taking $600 for a fine portable jobsite saw vs $1500+ for a proper
> cabinet saw. I need at the very least 1/32 inch ignment so ... Any experts
> have an opinion?
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
--
Chris Boden
President
The Geek Group National Science Center
www.thegeekgroup.org
We Build Awesome
--
This email may contain confidential and privileged material for the sole
use of the intended recipient. Any review or distribution by others is
strictly prohibited. If you are not the intended recipient please contact
the sender and delete all copies.
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla