I probably have some surplus ones sitting around, how many do you need and
what length? Alternatively, you can get ceramic wiring feed throughs from
old houses that used knob and tube wiring, or you can get glass rod from
anywhere that sells glass and fuse a screw into the end - the choices are
endless. Older military electronics is likely to have standoffs like you
want.
-----Original Message-----
From: Tesla [mailto:tesla-bounces@xxxxxxxxxx] On Behalf Of Matthew Sweeney
Sent: Tuesday, October 27, 2015 6:22 PM
To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
Subject: [TCML] High Voltage Stand-offs
Does anyone have leads on affordable high-voltage standoffs for safety gaps?
I see the ceramic ones but they are very expensive wherever I look, even the
small ones.
Could I possibly make my own using PVC tubing or would I be looking at
problems due to high temperatures? I would normally just try it and see but
I don't want to damage my terry filter =)
Thanks!
Matt
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla