Doug
May I suggest again, to build a larger toroid, for better match to the secondary coil -? Retuning required, but you will be surprised of the progress. Much valuable, highly interesting informations you find on the many expert homepages ...
Best regards, Fritz
<<I took the advice some of you gave to improve my small TC. I wound a new secondary, 7.5 inches with AWG26 on a 1.66 inch form, and raised it so it was above the bottom coil of the primary. I also had to add a few wraps to the primary.
If you watch the video you can see the improvement it made. You can also see that it shuts off abruptly, that is because one of the 2 [102MX30kv] caps in parallel decided to take a sabbatical! So, now I need a better suited Cap for this TC. Can someone advise me on one? Power supply for the coil is-6KV NST 30ma.
https://youtu.be/Q5TkKBA4eLA
Doug>>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla