User-agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9; rv:31.0) Gecko/20100101 Thunderbird/31.3.0
On 1/15/15 6:20 AM, Tuomas Koivurova wrote:
I went for 1.5x tube diameter spacing (from side to side) and it works ok.
I do get stray streamers at extreme power levels but that is to be
expected.
so, for a 1cm tube, there would be 1.5cm between tubes (the tubes are
2.5cm center to center)?
That's similar to the "spacing = circumference" that I use when modeling
structures and antennas in NEC.
On 15 Jan 2015 16:15, "Jim Lux" <jimlux@xxxxxxxxxxxxx> wrote:
Anyone have any design guidelines for top load toroids made of tubes (like
Greg's picture in the recent post on 150kVA SGTC thread).
Is there some rule of thumb like "spacing between the tubes should be the
tube diameter or circumference"..
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla