[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Brass Strip



Hi
      Look online for brass shim stock, that what they use in machine shops.
You should find it than.
Alton

Sent from my iPad

> On Oct 4, 2013, at 8:18 AM, Tim Flood <tfloodrr@xxxxxxxxx> wrote:
> 
> Does anyone have a source for brass 1/2" wide by .020 to .030" thick by 20'
> long? Yes, I am checking on line.
> 
> The performance of my small TC has dropped off so I was doing some
> upgrading last night. I found that brass ribbon primary had cracked in half
> about two turns out from the secondary.
> 
> Thanks in advance for any suggestions.
> 
> 
> Tim Flood
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla