[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [TCML] Matt tesla

i already have used some of the calculators to get the values that it should be the first time i mesured it i got values that were close the second time not at all

> Date: Sat, 18 May 2013 07:38:57 -0700
> From: jimlux@xxxxxxxxxxxxx
> To: tesla@xxxxxxxxxx
> Subject: Re: [TCML] Matt tesla
> 
> On 5/17/13 6:24 PM, Matthew Hebb wrote:
> > im trying to find the frequencys with an ossillascope and signal generator but it did not go well and now i don't have the scope and generator since they were somone elses i was useing i googled how to do it and i ended up with 3 different frequencys doing the same thing 3 times
> >
> 
> I would start with running the model rather than trying to measure it. 
> Generally, the model will give you a number that's within 10% of the 
> actual frequency; then, when you go out to measure, you'll know whether 
> you're looking in the right place.
> 
> Measuring resonance with a signal generator is a bit tricky, especially 
> if you're looking at the whole system with both primary and secondary.
> 
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
 		 	   		  _______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla