Re: [TCML] In need of a HV transformer but not a neon

[Travis Tabbal <travis@xxxxxxxxxx>]

It's all about location. :)

If you're close enough to Salt Lake City to want to pick one up, I have a
10kVA 14.4KV pig I'd be willing to part with. I can't deal with shipping
though, so local pick-up only.


On Wed, May 1, 2013 at 8:05 AM, Bert Hickman <bert.hickman@xxxxxxxxxx>wrote:

> Hi Chris,
>
> Where are you located?
>
> I have several NOS 14.4 kV ABB V1Z-11 line-to-ground style 120:1
> Voltage/Potential Transformers (PT's). These are available for pickup only
> from the Chicago, IL area. These were designed for service within
> metal-clad switchgear, so they are physically smaller and lighter since
> they lack the "ears" seen on outdoor PT's.
>
> Specs can be seen here:
> http://tinyurl.com/ABB-PT-VIZ-**11 <http://tinyurl.com/ABB-PT-VIZ-11>
>
> Here's what one looks like with the fuse holder attached (easily
> removable):
> http://capturedlightning.com/**photos/Electrical/**
> Transformers/Potential/IMG_**1262.JPG<http://capturedlightning.com/photos/Electrical/Transformers/Potential/IMG_1262.JPG>
>
> These weigh about 80 pounds apiece, and I'm asking $275 each. Send me a
> private message if interested.
>
> Bert
> --
> Bert Hickman
> Stoneridge Engineering
> http://www.capturedlightning.**com <http://www.capturedlightning.com>
> ****************************************************************
> ***********
> World's source for "Captured Lightning" Lichtenberg Figure sculptures,
> magnetically "shrunken" coins, and scarce/out of print technical books
> ****************************************************************
> ***********
>
>
> Chris Jones wrote:
>
>> I'm tempted to dabble in the tesla coil fun again. I was a few year member
>> of this mailing list probably about 15 years or so ago. Back in the day I
>> built 4 different coils. All were static gap using neon's except for the
>> last and final one which was a 7.2KV epoxy encapsulated potential
>> transformer. Anyway, I eventually moved on and parted with all of my
>> transformers, wire, coil forms. So that brings me to now. I know this day
>> and age everything to have more rules and laws than back then. So I
>> thought
>> I'd turn to this list as a possiblity of locating some parts. First off is
>> the transformer. I'm looking for something in the 14.4KV range with
>> atleast
>> 1.5KVA. Will consider lower voltage such as 12.6KV. The smaller the
>> transformer size the better because I know they are very heavy and
>> freight/shipping is going to be a challenge. Anyone has any leads let me
>> know, Thanks.
>> ______________________________**_________________
>> Tesla mailing list
>> Tesla@xxxxxxxxxx
>> http://www.pupman.com/mailman/**listinfo/tesla<http://www.pupman.com/mailman/listinfo/tesla>
>>
>>
>>
> ______________________________**_________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/**listinfo/tesla<http://www.pupman.com/mailman/listinfo/tesla>
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla