Re: [TCML] Conductive paint

["Derek, Extreme Electronics" <tesla@xxxxxxxxxxxxxxxxxxxxxxxx>]

Matt
Bear conductive paint works with ping-pong balls for high voltage
http://www.extremeelectronics.co.uk/hvexperiments/franklyn-bells/

Details in using the paint for making conductive balls from pingpong 
balls (Near the bottom)
http://www.extremeelectronics.co.uk/hvexperiments/conductive-balls-for-hv-experiments/

Care would need to be taken to ensure corona or arcs were not present on 
a topload as the finish quickly gets eaten away.

For large top loads, I can't see it will beat adhesive foil.

Derek


On 14/06/2013 18:08, mddeming@xxxxxxx wrote:
> Article on new non-toxic, highly conductive paint. Maybe good for toploads?
>
>
> http://www.electronicproducts.com/Packaging_and_Hardware/Adhesives_Sealants_Coatings/Special_Paint_Is_a_Conduit_for_Electricity.aspx
>
>
>
>
> Matt D
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla


--
Web:www.extremeelectronics.co.uk <http://www.extremeelectronics.co.uk>
Twitter @ExtElec <https://twitter.com/ExtElec>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla