Re: [TCML] Flywheel Pulley on Treadmill Motor

[dave pierson <dave_p@xxxxxxxxxxx>]

> The next thing I would try is put the V belt around the pulley
> and grip the belt/pulley with a large pair of Channel Locks or
> similar tool. Give the tool handle a sharp rap with a
> soft-faced hammer with the motor held securely.

     A near variant: if a band-clamp (woodworking) is
     handy, might be used similarly.

     Is there room to grab the shaft with vicegrips,
     perhaps with jaws padded?

     best
      dwp
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla