Re: [TCML] 6" Tesla coil plexiglass secondary - FOR SALE

[Neon Tesla <neontesla@xxxxxxxxx>]

Though SG models still prevail for some reason (perhaps $$$, or ease of
use?)


On Wed, Jan 16, 2013 at 11:28 AM, drieben <drieben@xxxxxxx> wrote:

> And the ASRG electrodes are the only thing in my 12" PVC
> secondaried Green Monster coil that gets "noticably"warm as
> well. Which means the SG is where the MAJORITY of the
> losses are in most, if not all SG driven TCs, assuming proper
> tuning and proper construction techniques. That's the big
> factor that makes DRSSTCs more efficient than their SG
> driven counterparts - silicon isn't near as lossy as a SG!
>
> David
>
>
> ----- Original Message ----- From: "Scott Moseley" <scott@xxxxxxxxxx>
>
> To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
> Sent: Wednesday, January 16, 2013 11:03 AM
> Subject: RE: [TCML] 6" Tesla coil plexiglass secondary - FOR SALE
>
>
>
> Not to "rock the boat" here guys, but my coil is totally built out of
> acrylic and it never gets warm.  The ONLY thing that does is the spark gap.
>
>
> -----Original Message-----
>
> ______________________________**_________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/**listinfo/tesla<http://www.pupman.com/mailman/listinfo/tesla>
>



-- 
*Don't lower your expectations, raise the voltage !*
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla