[TCML] Polycarbonate Adhesive?

["McCauley, Daniel H" <daniel.h.mccauley@xxxxxxxx>]

Anyone have any ideas on a cheap, easily obtainable substance which can glue two pieces of polycarbonate together?
I tried using a dedicated polycarbonate adhesive, but my two pieces of some gaps between them and it not bonding correctly.

Is there an off-the-shelf epoxy that's available at a hardware store etc...???

I only have a single piece to glue, so I'm not looking to spe














nd $30 on a specialized adhesive.





Thanks











this remarkable set of books during lunch while searching for information on 715B radar modulator tubes.  That search led to this URL which discusses the use of the tubes, and design lineage from WWII requirements to the 5D21 pulse tetrode.

http://www.alcatel-lucent.com/bstj/vol26-1947/articles/bstj26-4-818.pdf

Which led me to this remarkable treasure trove of books, the complete Bell System Technical Journals from 1922 to 1983.

http://www.alcatel-lucent.com/bstj/

Which led to a phenomenal reference of using spark gaps in radar modulators, with loss measurements!

http://www.alcatel-lucent.com/bstj/vol25-1946/articles/bstj25-4-563.pdf

Probably more spark gap and radar modulator type circuits in this technical series and maybe additional tube stuff germane to VTTC's.
WOW what a reference!

--
Dave Sharpe, TCBOR/HEAS
Chesterfield, VA USA

Sharpe's Axiom of Murphy's Law
"Physics trumps opinion!"
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla