[TCML] 6" Tesla coil plexiglass secondary - FOR SALE

[dfroula@xxxxxxxxxxxxx]

Hi,

I have a 6" Tesla coil secondary coil for sale on Ebay.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140906556573

The details:

Tesla Coil Secondary - Ideal for medium to high power Tesla coils

6 inches in diameter, 24.75 inch winding length, 23 AWG enamled wire, 1030 turns, close-wound.

27.25" overall length

Wound on low-loss plexiglass form. Far superior to lossy PVC coil form!

Sealed with plexiglass end-caps to eliminate internal arcing. Small vent hole on center of bottom cap.

Entire coil sealed with multiple coats of epoxy.

Copper grounding plate soldered to wire end and epoxied into bottom of coil form, per Richard Quick design.

Several feet of free wire at high voltage end for connection to toroid or discharge terminal.

Ideal 4:1 aspect ratio.

Calculated resonance = 273.65 KHz, Q=310, DC resistance = 33 Ohms (JavaTC Calculations)

$5.00 starting bid, no reserve.

Best,

Don
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla