[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] MOT ballasting options
On 01/02/2013 02:27 PM, Tesla wrote:
> Hi
> Another way to consider is to make MOT systems that don't need
> ballasting such as DC type designs where altering the break rate
> determines current draw, see http://scopeboy.com/tesla/tc2schem.html
>
> These designs can be scaled and adapted to suit, my big 10kW coil uses 6
> MOT's, full-wave rectification of the MOT's, MOT based DC filter and a
> ring up inductor made from MOT's
Did you put a gap in cores you used as the ring up chokes, or just leave
them as is?
Jon
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla