[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] understanding DRSSTC



Udo,

> In principle you can run your DRSSTC at any frequency. Just connect a signal generator
> to your bridge. 
- That is possible for testing of course, but I would like to understand the system in 
general.

>  I believe you will run at the pole, which is closest to the primary resonant
> frequency. 
- That should be the lower pole.

> With a PLL driver (Steve Conner has done this) you have a choice between the upper and
> the lower pole. 
- I'll start with a simple logic (Steve Ward) which can be replaced with a more 
sophisticated later.
 
Thanks,

Herwig
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla