Re: [TCML] 3 phase to 1 phase conversion

[ADAM MUNICH <ajm9414@xxxxxxx>]

http://en.wikipedia.org/wiki/Scott-T_transformer

Close... but not quite.



On Fri, Sep 14, 2012 at 4:43 PM, Mark X2 <susax2@xxxxxxxxx> wrote:
> Hi,
>
> at home I have 3 phase electric power, 3x25A (230V 50Hz).
>
> For powering a classic AC spark gap coil I'm basically limited to 3,68kW,
> since the circuit breakers are 16A.
> Perhaps changing one to 20A would be a max. of 4.6kW. But I'm a bit
> reluctant to do that, because the power company's 25A fuses are a bit more
> costly to get replaced.
>
> If I would like to use a pole pig or parallel multiple PT's, 16A would be a
> bit dorky.
> Is there an out of the box solution to convert 3 to single phase for more
> current? It's not possible to simply connect a transformer or variac
> between 2 phases instead of 1 phase + Neutral?
>
> Greets,
> Mark
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla