[TCML] NWL Pulse Cap Question

["drieben" <drieben@xxxxxxx>]

Hi all,

I was wondering if there was anyone on here that had access to the
spec data on a couple of oil-filled NWL cap units that I have. I have 
tried to Google more info on them, but it looks like NWL custom built 
these units and doesn't care to share the "intimate details" of their con-
struction and detailed specs ( dv/dt, RMS and pk current, dielectric 
system, ect.). They are each a 6.5" x 8" x 13" tall white polypro-
pylene block with the same type of slender, 4 screw terminals as
the single ended style Maxwells and GA caps. The terminals are
mounted about 1" from the "top" of the 13" height, on opposite sides
of their 6.5" width. The label states that they are rated at
0.18 uFd @ 100 kVDC and their "catalogue number" is 11975.
They were obviously ran one right after the other, as their serial 
numbers are 019614 and 019615. I obtained these from an eBay 
seller a few years ago who was selling 3 of these seperately. I ob-
viously ended up with these 2.

If someone needs some pics of one, let me know and I can email 
some to you. Any info on these would be greatly appreciated.

Thanks,
David
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla