[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Using tree as RF ground



No that is not a good idea, If you are desperate for an RF ground try it,
but everywhere in the house there is a faucet you risk people being
shocked (especially if the line to the street is PVC) and if your pipes do
come in contact with wiring (as illegal as that is) it will destroy the
complex circuits on that breaker and if a Natural Gas line comes in
contact with your water line (as illegal as that is) it could blow up your
house! plus you could kill your water heater.

On Thu, Oct 4, 2012 at 6:33 AM, anthony lockwood <
siranthonylockwood@xxxxxxxxxxxxx> wrote:

> Hi I use my cold water tap,I dont know if it's a.good idea but It does
> work.
>
> > Date: Wed, 3 Oct 2012 21:17:29 -0400
> > To: tesla@xxxxxxxxxx
> > From: skipmalley@xxxxxxxxxxx
> > Subject: Re: [TCML] Using tree as RF ground
> >
> > Don't trust that an existing ground rod is actually in 8 feet.  I
> > have known electricians that will pound in a ground rod and then just
> > cut it off when it hits a rock and will not go in any further.
> >
> > Skip
> >
> > At 09:40 PM 9/24/2012, you wrote:
> > >I would not expect a tree to provide a sufficient ground, and plants
> > >typically do not survive high voltages.
> > >
> > >Your house has a 220V service line coming into the house.  Typically,
> there
> > >is a grounding rod driven into the ground at this location.  You
> probably
> > >you be best off driving in your dedicated ground nearby to that one.  As
> > >there is one ground rod, I would expect the soil in that region to be
> > >sufficiently soft for another.  Alternatively, I suppose you could use
> your
> > >house ground, however, I would advise against that as all of your
> household
> > >electronics are directly connected.
> > >
> > >Has anyone used a counterpoise as a floating ground?  If so, what were
> the
> > >dimensions?  I recall reading that someone once used a twin coil as a
> > >floating ground with some success.  Effectively, just a 1/2 wave coil
> with a
> > >conventional driven 1/4 wave coil.  As I recall, the "ground" lead was
> hot.
> > >
> > >Yours truly,
> > >
> > >Mike Day
> > >
> > >
> > > > From: Dave Leddon <dave@xxxxxxxxxx>
> > > > Reply-To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
> > > > Date: Mon, 24 Sep 2012 09:40:09 -0700
> > > > To: Tesla Coil Mailing List <tesla@xxxxxxxxxx>
> > > > Subject: [TCML] Using tree as RF ground
> > > >
> > > > Hi all,
> > > > I have recently moved to a new house which, as near as I can tell,
> > > > sits on top of a granite hill.  I've tried pounding in an eight-foot
> > > > ground rod at various locations only to hit impenetrable soil at a
> > > > depth of about one to two feet.  The property has numerous large pine
> > > > trees with diameters ranging up to 4 feet and it occurred to me that
> > > > such a tree might make a great RF ground by driving a spike into the
> > > > trunk near the base.  Does anybody have experience using trees for
> > > > grounding Tesla Coils and is there any likelihood that the current
> > > > could damage the tree?
> > > > Dave
> > > >
> > > > _______________________________________________
> > > > Tesla mailing list
> > > > Tesla@xxxxxxxxxx
> > > > http://www.pupman.com/mailman/listinfo/tesla
> > >
> > >
> > >_______________________________________________
> > >Tesla mailing list
> > >Tesla@xxxxxxxxxx
> > >http://www.pupman.com/mailman/listinfo/tesla
> >
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>



-- 
*Don't lower your expectations, raise the voltage !*
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla