[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] voltage



While bragging about voltage to the uninitiated are kewl, spark length, color, brightness, shape (single versus multiple) and behavior, is what almost all of us are after, and that's easy enough to define.

So I see three fairly easy to measure, brag, compare, etc. metrics:

Single shot mode
No breakout point with a specified number of hits per minute
Breakout point, with a specified number of hits per minute



________________________________
 From: Bob Svangren <qogman@xxxxxxxxxxx>
To: 
Sent: Wednesday, January 25, 2012 1:04 PM
Subject: [TCML] voltage
 

Hi guys,
  I notice that there is a lot of conversation on measuring the terminal voltages on these fantastic coils.
  I have read a lot of books on the subject over the years and found that it takes very complicated and costly equipment to measure these very high voltages. It seems that everything has a bearing on the accurate measurements such as the electrostatic field, barometric pressure, humidity, AC- DC. frequency and many other factors.
  Of course we all like boasting rights of our coil output and it's great to say that we are putting out a million volts but in reality, no one is sure of this number
  The best experts cant agree on what an inch of arc is equal too but it ranges from 10,000 volts per inch to 50,000 volts per inch of arc. The makers of stun guns claim anywhere from 100,000 volts to a million volts for less than a three inch arc as one example. Who would believe any of this to be fact.
  We do need our boasting rights and I for one would be in favor of adopting our own voltage standard which we could all understand and would do away with all this guess work.
  I have determined that 20,000 volts would be a good and close to accurate standard for us to use and we would all be on the same page. Be it right or be it wrong the 20KV per inch should be close for our use.
  If we should adopt the 20KV volts per inch standard, I would be in favor of naming our new standard after the late and great Mr. Harry Goldman who gave much of his life to making coiling fun and interesting for all of us to enjoy.  We could simply call this the Goldman standard.  A 50 inch arc would equal a million volts. Doesn't that have a nice ring to it?
  So, the big question is, what do you fellows think of this plan.
                                                                                                            Bob                           _______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla