[TCML] Testing a tripler

[<mrapol@xxxxxxxxxxxx>]

I was hoping for a little advice. I obtained a couple of TV voltage triplers 
(part number 1895-641-095). These are voltage multipliers used mainly in 
older TVs to boost and rectify voltage to the picture tube.

They seem OK, but I'd like to test them before going to all the trouble of 
assembling components around them to produce HV DC. I can't seem to find 
specs or meter readings for them. Anyone know what values I should get 
testing them with a multimeter?

There are four inputs: D, A, U~ and UF. UF is for focus control. U~ is the 
hot lead, A is neutral or ground. I'm not sure what D is for.

There's one HV output. It has a suction cup connector on it, like you see on 
flybacks.

Any tips?

PBT 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla