[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Best GDT core for the mini SSTC



Nice setup there :)

On Fri, Nov 30, 2012 at 10:09 PM, Bart B. Anderson
<bartb@xxxxxxxxxxxxxxxx>wrote:

> With the Cat-5 wire, turns, and mounting, it was a prefect size.
> http://www.classictesla.com/**temp/GDT_B64290L0659X037.jpg<http://www.classictesla.com/temp/GDT_B64290L0659X037.jpg>
>
> Bart
>
>
> On 11/30/2012 10:40 AM, Atomic wrote:
>
>> Why did you get a larger size, Bart?
>>
>> Thanks!
>>
>> On Fri, Nov 30, 2012 at 3:34 PM, Bart B. Anderson <bartb@xxxxxxxxxxxxxxxx
>> >wrote:
>>
>>  I would stick with the higher AL and permeability values myself. The one
>>> I
>>> used was from mouser, a bit more expensive, but worked fine.
>>> http://www.mouser.com/Search/****ProductDetail.aspx?R=**<http://www.mouser.com/Search/**ProductDetail.aspx?R=**>
>>> B64290L0659X037virtualkey59250****000virtualkey871-****B64290L0659X037<
>>> http://www.**mouser.com/Search/**ProductDetail.aspx?R=**
>>> B64290L0659X037virtualkey59250**000virtualkey871-**B64290L0659X037<http://www.mouser.com/Search/ProductDetail.aspx?R=B64290L0659X037virtualkey59250000virtualkey871-B64290L0659X037>
>>> >
>>>
>>>
>>> Material is T37, AL=9800 ą25%, u=6000
>>>
>>> I sought out this one due to a couple attempts winding with poor choices.
>>> Winding GDT's (or even CT's) is something you don't want to do once.
>>>
>>> Take care,
>>> Bart
>>>
>>>
> ______________________________**_________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/**listinfo/tesla<http://www.pupman.com/mailman/listinfo/tesla>
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla