RE: [TCML] Van de graff generator help

[James Hutton <b-u-r-t-o-n-boy@xxxxxxxxxxx>]

I went ahead and tried it, and you were absolutely right.I could hear a faint snap every few seconds as the electrons were lost.I got very small sparks from the dome.However, the "standing hair" trick still seemed to  work very well.
Anyways, back to the drawing board.  :)

> Date: Wed, 11 Apr 2012 22:55:53 +0000
> From: jhowson4@xxxxxxxxxxx
> To: tesla@xxxxxxxxxx
> Subject: Re: [TCML] Van de graff generator help
> 
> James, 
> I am sure it would work, but not very well at all. 
> 
> The electrons jumping from the belt to comb are easily lost. So you really rely on the fact that they are internal to the sphere to sort of trap them. 
> in fact on larger systems this is so much of a problem that an inner ring is added to prevent the electrons from shooting back down and inducing surface tracking arcs down the tube. 
> Bottom line is the exterior comb idea really decreases efficiency in my experience, we tried numerous different things with the unit i made a few years back for a local museum. http://s139.photobucket.com/albums/q295/JHowson/Van%20De%20Graaff/ 
> That being one of them. 
> 
> Feel free to contact me if you wish to discuss further. 
> 
> 
> 
> 
> Thanks, 
> John "Jay" Howson IV 
> 
> 
> "Why thank you, I will be happy to take those electrons off your hands." 
> 
> ----- Original Message -----
> From: "James Hutton" <b-u-r-t-o-n-boy@xxxxxxxxxxx> 
> To: tesla@xxxxxxxxxx 
> Sent: Wednesday, April 11, 2012 5:37:31 PM 
> Subject: [TCML] Van de graff generator help 
> 
> Hey guys, this might be the wrong place to ask, and I understand if this is rejected but I need some help with a van de graff generator I'm working on. 
> In almost every generator I've seen, the top comb is inside the top load. I was wondering if it is 100% necessary for the comb to be inside. I was hoping to have the comb about half a foot underneath the bottom of the metal dome so that people can see what is happening. Then the comb will be attached to a wire that goes directly to the dome about half a foot above. 
> 
> Thanks for the help! 
> _______________________________________________ 
> Tesla mailing list 
> Tesla@xxxxxxxxxx 
> http://www.pupman.com/mailman/listinfo/tesla 
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
 		 	   		  _______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla