RE: [TCML] Variacs and Pole Pigs

["Philip" <phil@xxxxxxxxxxx>]

You need to either draw the circuit out and scan it, or use a graphics or
paint program. Then post it on a picture hosting site. 

Regards
Phil Tuck

www.hvtesla.com


-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Neon Tesla
Sent: 07 April 2012 05:58
To: tesla@xxxxxxxxxx
Subject: Re: [TCML] Variacs and Pole Pigs

The ballast arrangement  is very strangely, configured (I haven't ever seen
it like this before, sorry about the first bad diagram.)

The variac is wired normally;
the ballast bridges around the end of the hot side of the variac's
attachment to the pig line;
but instead of the  hot line of the pig continuing, it stops at the variac,
being forced through ballast, leaving the variac untouched by the current.

Would this work?
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla