Re: [TCML] IGBT Module

["Carlos Van Camp" <carlos@xxxxxxxxxxxxxxxxxxxxxx>]

Ouch!! Yeah, I was thinking they would be expensive, but thats about twice 
my estimate!
Stil, if I have to have it then not much choice...

I am planning to use it to switch on and off the cathode of a VERY large 
Musical Valve coil.
My bench top coil is peaking out at 1200v accros the transistor,so I am 
expecting much higher volts when running the bigger machine.

Any Ideas?

CARLOS

----- Original Message ----- 
From: "Bayley Wang" <wang9xb17@xxxxxxxxx>
To: "Tesla Coil Mailing List" <tesla@xxxxxxxxxx>
Sent: Tuesday, September 06, 2011 4:24 AM
Subject: Re: [TCML] IGBT Module


> What application, and what budget? HV bricks are going to cost you an arm
> and a leg, and perhaps some more...
> For example, a quick glance at Mouser tells me that a 6300V 600A Infineon
> brick costs $3300...
>
> On Mon, Sep 5, 2011 at 4:49 AM, Carlos Van Camp <
> carlos@xxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> > Hi Can anyone suggest a good place to buy HV IGBT modules.
> > I am in New zealand and a lot of companies wont deal internationally...
> >
> > I am looking for something around 4.5kv - 6kv at 600 Amps.
> > I need only  1 at first, but probably buy 2 more shortly after.
> > Purhaps someone on list has one to sell...?
> >
> > Thanks,
> >
> > Carlos
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla