RE: [TCML] NST and HV Cables

["Phil Tuck" <phil@xxxxxxxxxxx>]

NO, no good at all. You need the older heavy sort. There are three types:

Type 1: If it's big, heavy and old, and filled with tar it will work.
Type 2: If it's big, heavy and new and filled with resin, it MAY work. (like
the FART earlier)
Type 3: If it's small and light, it's no good.

Good test is to drop it on your mate's foot, if he hits you afterwards it's
either type 1 or 2.

Phil


-----Original Message-----
From: tesla-bounces@xxxxxxxxxx [mailto:tesla-bounces@xxxxxxxxxx] On Behalf
Of Rixong
Sent: 19 October 2011 18:52
To: tesla@xxxxxxxxxx
Subject: Re: [TCML] NST and HV Cables

We actually managed to get our hands on a 8 kV NST. If you look at the
attached pdf  you'll see all of its specifications (our transformer is
called "N 40/8 RC") Is this NST suitable for a tesla coil?

http://www.neoncomp.fi/pdf/prod_RC_re2.pdf 

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla