Re: [TCML] High voltage glue and ferrite cores

[Grenadier <teravolt.org@xxxxxxxxx>]

TSC makes very nice cores, but often you'll need to wait a few weeks for
them to ship. As far as glue goes, super glue works best for making
transformers, at least in my experiance.

On Tue, Nov 29, 2011 at 11:16 AM, Bayley Wang <wang9xb17@xxxxxxxxx> wrote:

> TSC is an excellent source for ferrite, especially since they have a
> convenient online store.
>
> On Tue, Nov 29, 2011 at 10:40 AM, Scott Bogard <sdbogard@xxxxxxxxx> wrote:
>
> > Hi All,
> >     Looking for suggestions for a glue that will be high voltage hearty,
> > trying to steer away from epoxies, or anything else that must be mixed,
> or
> > melted (tar, wax etc.)  This will be for securing the paper layers of my
> > flyback transformer together, I was leaning towards eithor rubber cement
> or
> > even plain elmers glue, but do not know if they will hold up ot HV or
> even
> > small amounts of corona, so looking for suggestions.  It must be cheap,
> and
> > easy, and a relatively fast dry time would be nice, I'd rather not take
> 40
> > days to put together a flyback secondary...  Also I found a potential
> > source for ferrite cores, has anybody had dealings with this company?
> > http://tscinternational.net/tscstoreUcore.html
> > I'm going to try and order tomorrow night and will share my experience if
> > anybody is interested, their data sheet says their large U cores are good
> > to almost 300 watts...
> >
> > Scott Bogard
> > _______________________________________________
> > Tesla mailing list
> > Tesla@xxxxxxxxxx
> > http://www.pupman.com/mailman/listinfo/tesla
> >
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla