[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCML] Looking for Pole Pig Capacitors



On 11/25/2011 5:53 PM, Amir Mojarradi wrote:

Hello everyone!

I recently destroyed a 0.03 uFd  35kv Maxwell capacitor (#37667) of which I was using (4) in parallel to achieve 0.15 uFd at 35kv. I am running a 10kva 14.7kv pole pig powered coil with a 12in diameter, 57" winding length secondary, and a 60in major/ 12in minor diameter toroid. The single capacitor cracked in half and splashed oil for a good 8 feet. Evidently, my configuration was poorly designed to handle the ~ 15 kv input. Apparently, people have had this issue before and I was previously warned by David Rieben.

David suggested 2 of these Aerovox 0.305 uFd 50KV Capacitors in series, but that would be a bit pricey given the shipping for about152 lbs! Yet, I am considering them.
http://www.ebay.com/itm/Aerovox-Tesla-50KV-High-Voltage-Aerostor-Pulse-Capacitor-/200679608603?pt=LH_DefaultDomain_0&hash=item2eb96fd11b

Is anyone willing to sell pole pig suitable capacitors, either single unit or several, for approximately a 0.15uFd  50KV + rated capacitor bank? I'm a student and my budget is around $100-200 and I will of course pay for shipping and handling; I live near Pasadena, California. Please let me know if you have any comments or suggestions regarding possible capacitor choices; they will be greatly appreciated.

Thank you for your kindness,

Amir Mojarradi



_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla

Those Aerovox capacitors sound like a good deal to me. Im tempted to get a couple myself but if I made my coil any more powerful I would have to take it outside to run it. Your set up sounds pretty awesome. Do you have any pictures?

Roger
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla