[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TCML] mmc array capacitance
Thanks
On Fri, Mar 25, 2011 at 5:33 PM, Gary Lau <glau1024@xxxxxxxxx> wrote:
> There will be resonant rise to some degree over a very wide range of
> capacitance values. I have found that there is by no means a narrow
> capacitive "sweet spot". And when using a static gap, resonant rise really
> isn't a bad thing, unless one opens up the gap wider than one should. Yes
> -
> a little higher or lower than prescribed LTR values are fine.
>
> Regards, Gary Lau
> MA, USA
>
> On Fri, Mar 25, 2011 at 7:47 PM, John Contovasilis <
> jlcontovasilis@xxxxxxxxx
> > wrote:
>
> > I was wondering, when you are using a NST to power a tesla coil, if the
> > total mmc capacitance has to equal the LTR capacitance exactly to
> eliminate
> > resonate rise. Can it be a little higher or lower?
> >
> > John
> >
> >
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla