Re: [TCML] Capacitors

[Gary Lau <glau1024@xxxxxxxxx>]

The voltage and uF values come out OK, but the choice of your .22/400V caps
is critical - it needs to be polypro dielectric with foil plates, rated for
high peak & RMS currents - a rather tall order.  There are many PP caps that
sound good, but have proven not so good.  That's why most folks just stick
with the proven CDE 952C series.  What you have _may_ work, or not.  It
depends...

Regards, Gary Lau
MA, USA

On Fri, Mar 25, 2011 at 9:01 PM, Cole Awesome-Jordan <
jordancole@xxxxxxxxxxxxxxxxxxx> wrote:

> I redid my calculation and my numbers were way off, would these numbers
> work? 1 strand of 36 .22uF 400v and the MMC is equal to .0061uF for a 10000v
> 23mA 60 Hz OBITs
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla
>
_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla