Re: [TCML] SSTC type Drive for X-ray transformer

[Jim Lux <jimlux@xxxxxxxxxxxxx>]

On 6/5/11 7:55 PM, Peter Terren wrote:
> If you want an exposure, you just keep the power cables vertical and it
> will blur out and be invisible in the final film.

I'm not using it as an X-ray machine (no tube/head).. just the power supply.


> -----Original Message----- From: Jim Lux
> Sent: Monday, June 06, 2011 1:25 AM
>
> I'm speculating about schemes to repurpose an Xray transformer I have
> for a DC coil. It's in a portable machine designed to produce about
> 100mA at 110kV (10kW) and it runs at a few hundred Hz off a discrete
> multivibrator made with SCRs, powered by about 100V in NiCds (the idea
> is that you charge this thing continuously, then roll it down the hall
> to make your exposure, etc.... that way you don't have to have a 10kW AC
> feed..)
>
>
>
> _______________________________________________
> Tesla mailing list
> Tesla@xxxxxxxxxx
> http://www.pupman.com/mailman/listinfo/tesla

_______________________________________________
Tesla mailing list
Tesla@xxxxxxxxxx
http://www.pupman.com/mailman/listinfo/tesla